TLT235SBA Floor Plate Two Post Lift
Standard Floor Plate Two Post Lift (Rated Capacity: 3.5Ton);applicable for the lifting of various small and medium-sized vehicles with total weight below 3.5t/3.2t in garage and workshop.Euipped with electrical control box.
Fully automatic unlocking safety device is adopted for operating only
with UP/DOWN button.
The cable and oil pipe are fully concealed; with decent and elegant
Double hydraulic cylinder and high strength chain drive makes stable
and smooth lifting and lowering.
Wire rope equalization system forces synchronous movement of two
carriages and effectively prevents vehicle form tilting.
24V low voltage control box（IP54 level）ensures operator’s safety.
Cylinder travel limit switch effectively protects cylinder and extends
Emergency lowering valve can be manually operated to make lift
lower safely in case power is off.
Flow-control valve is deployed to make lift slower or stop lowering for
the case of oil explosion ,thus protects operator’s safety and vehicle
not being damaged.
CE-STOP function with safety alarm beep would automatically warn
operators to keep safe distance from lift when it lowers to about
250mm high from ground.
Door rubber pad protects car door from being damaged in collision.
More lifting pads with different height meets the requirements for light
lorries and SUVs.
Asymmetric arms are optional.
Passed 115% dynamic loading test and 150% static loading test .
Rated load： 3500kg
Lifting height： 1850mm
Initial height： 110mm
Lifting time： less than or equal to 50s
Lowering time： between 20s and 40s
Passing width： 2486mm
Overall width： 3370mm
Overall height： 2860mm
Motor power ： 2 .2kw
Motor voltage： 3 phase/380v or Single phase/220V
Working noise： less than or equal to 75dB（A）
Working oil pressure： 16M Pa